From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
I found that the AI GND , AO GND & DGND , are all shorted together internally in the board. When providing analouge output to a certain circuit (for test) , & reading the output using analouge in , i don't know how to make connections for NRSE configuration ? What to connect to the AI SENSE , as both grounds of the circuit & the measurement system are shorted together ?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions Unofficial Forum Rules and Guidelines "Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5