Measurement Studio for .NET Languages

cancel
Showing results for 
Search instead for 
Did you mean: 

ScatterGraph crash ASP.NET

Dear Jessica,

Thank you.

If you would like to look further into this matter I would send you web access to our application so you could test the issue in person but to do that I need your contact (e-mail or something).

We could enable debug trace on scatter-graph control, but I don't know how to do that.

Other option would be to get debug version of scatter-graph control, so we could find what we are doing wrong.

Our partners are already complaining that they don't get full service from our application.

 

Thank you for you effort,

Beno.

0 Kudos
Message 11 of 19
(2,032 Views)
Hi Beno,

Thank you for all the information.  I was able to reproduce this behavior on my end.  I have filed a Corrective Action Report against this issue.  The CAR# for this issue is 100063.

Thank you for bringing this to our attention.




Jessica
National Instruments
Product Support Engineer
0 Kudos
Message 12 of 19
(2,005 Views)

Where can we follow the progress on CAR# for issue 100063?

 

Br,

Beno

0 Kudos
Message 13 of 19
(1,982 Views)
NI does not yet have a way that you can check on the status of these issues on your own. You can either post here to request a status update or you can contact customer support directly to inquire on the status.
 
For this particular issue, it turns out that we had already fixed it during our development of MStudio 8.5. During 8.5 development, we took a step back and evaluated our internationalization support. Our evaluation determined that we were not always doing the right thing, so we fixed the issues that we found.
 
So basically, the status is that this will be fixed in 8.5. Can you sign up for the Beta and try it out to verify that it does, indeed, fix the issue?
 
David Rohacek
National Instruments
 
 
0 Kudos
Message 14 of 19
(1,965 Views)

Hi.

Thnx I did sign up for beta but I only received following message over e-mail:

"

Thank you for registering for the Measurement Studio Beta Program.  Your
registration information will be reviewed by a Beta Coordinator during the
next beta cycle, and you will receive another email if you are approved to
participate in this Beta Program.

Please direct any responses to mstudio.beta@ni.com
"

 

Can you speedup things.

I would like to test it this weekend.

 

Beno

0 Kudos
Message 15 of 19
(1,958 Views)
Hi Beno,
 
You should be enabled now.
 
Best Regards,
Jonathan N.
National Instruments
0 Kudos
Message 16 of 19
(1,955 Views)

Thank you all.

 

0 Kudos
Message 17 of 19
(1,951 Views)
For now this issue is solved with 8.5 beta version of MStudio.
We continue to test our application with this version.
br,
Beno
0 Kudos
Message 18 of 19
(1,916 Views)

I am experiencing the same situation in the korea version of Mesumnet studio 2010 sp1(9.1.0.204).

when I take a PAN or ZOOM on the graph, the same error message is puped up.

 

I 'm seeking the solution about this trouble shooting...

0 Kudos
Message 19 of 19
(999 Views)