From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
10-16-2007 11:54 PM
10-17-2007 04:47 PM
Hi Puzzlegal,
Make sure you are logged in as an administrator before running your
program. If you are sure you have administrator privileges on your PC, we
will need to troubleshoot further.
I have a few questions for you about your system. What DAQ card are you
using? What version of the NI Traditional DAQ driver do you have
installed? Were you ever able to acquire signals with your DAQ card using
this program? Are you able to test your channel in Measurement and
Automation Explorer?
Keep me posted.
01-13-2008 10:03 AM
01-14-2008 01:48 PM
06-24-2011 12:15 PM
I'm trying to test my traditional NI-DAQ virtual channel and when I try to run the test I get 'error 10899 occurred at Al Group Config.' I'm running windows XP with a PCI NI 4351 and I'm logged in as administrator. It says that the channel is valid, any ideas?