Machine Vision

cancel
Showing results for 
Search instead for 
Did you mean: 

error message says "missing resource file imaqdx.rc"

Solved!
Go to solution

Using LV2010, gone back to a PC that's been unused for a while to access some old vision programs. On the block diagram the IMAQDX property node is disconnected and while loading the file I get a message that says, "missing resource file imaqdx.rc"

 

Suggestions?

 

0 Kudos
Message 1 of 7
(4,854 Views)
could you attach image of your code ?
I think you have problem with your vision toolkit
0 Kudos
Message 2 of 7
(4,841 Views)

Snip attched.

0 Kudos
Message 3 of 7
(4,837 Views)

Hello,

 

Please try the following:

 

1. Go to control panel » add remove programs » National Instruments software (double click this), and "remove/delete" the following items:

 

NI IMAQ

NI IMAQ runtime

NI IMAQdx

NI IMAQdx runtime

NI IMAQ IO

NI IMAQ IO runtime

(and any other item related to "IMAQ")

 

2. Reboot the PC

 

3. Install this:

 

NI Vision Acquisition Software February 2014
http://www.ni.com/download/ni-vision-acquisition-software-february-2014/4584/en/

 

4. Reboot the PC

 

5. Verify that the problem has been resolved.

 

Best regards,

Daniel C.

0 Kudos
Message 4 of 7
(4,828 Views)
what danubio told is last chance to you to solve your problem
but before to do that because it take so time to do
send your vi I try to test your property node problem if I could not find any problem you should do what danubio told you
0 Kudos
Message 5 of 7
(4,822 Views)

Hello Hatef.fouladi,

 

That is a kind offer but I am pretty sure the problem is with my IMAQ. I am going to unistall and re-install. I will let you know how that works out!

 

Thank you.

0 Kudos
Message 6 of 7
(4,819 Views)
Solution
Accepted by topic author another_novice

For anyone following this discussion, I did resolve the error message, but only by completely removing everything NI-related and then reinstalling. A major PITA!.

0 Kudos
Message 7 of 7
(4,744 Views)