06-18-2015 07:12 PM - edited 06-18-2015 07:19 PM
Hello!
i'm experiencing problems establishing connection with Baler camera A601F. On one computer it works just fine using NI-IMAQdx IIDC driver (LabView 2010). But it does not work on another machine (LabView 2011). I tried all options for drivers, all give errors of initilization in MAX. I attached a few screenshots of what i just described. Will appreciate any suggestion!
regards, Alex
06-19-2015 10:23 AM
Hi alex_mikh,
I have a few questions that may help us in troubleshooting. What version of IMAQdx is installed on the computer with LabVIEW 2010 that is working, and what version is on the one with LabVIEW 2011? What OS are you working on?
Also, below I linked a few resouces on FAQ with IEEE-1394 devices.
http://digital.ni.com/public.nsf/allkb/36544714F9D7D25786256F420080DCF7?OpenDocument
http://digital.ni.com/public.nsf/websearch/3B60C134020D0A0786256F4800004305
I hope this helps!
- Kale
06-22-2015 03:02 PM
Kale,
thanks for the feedback!
On one machine (that do not support the camera) we are using Win XP with IMAQdx 3.7. Do you know what is the latest version of IMAQdx that would work with Win XP?
regards, Alex
06-23-2015 07:36 PM
alex_mikh,
The latest version of Vision Acquisition Software (which includes IMAQdx) supports Win XP SP3 (32-bit). Below I've linked the download (note the VisionAcqReleaseNotes.html link).
http://www.ni.com/download/ni-vision-acquisition-software-february-2015/5149/en/
- Kale
06-24-2015 09:16 AM
Kale,
thanks a lot! it helped. Appreciate your help
regards, Alex