Lookout

cancel
Showing results for 
Search instead for 
Did you mean: 

SDM3000 & lookout 6.6

Using Lookout 6.6

Would like to connect lookout 6.6 to a motorola SDM3000 RTU.

this rtu uses ether net. would the MODBUSmoscad driver be what is needed? or standard modbud slecting ethernet?

is a driver needed for each the rtu and the local ethernet??

0 Kudos
Message 1 of 4
(5,999 Views)

I'm not sure if this RTU belongs to the Moscad family.

If this RTU supports Modbus Ethernet protocol, either Modbus or ModbusMoscad will work.

You need one driver for one RTU.

Ryan Shi
National Instruments
0 Kudos
Message 2 of 4
(5,990 Views)

Thanks for the reply,

this SMD3000 also known as model F4544A talks to a gateway and of course some do not! the end user program is MOSCAD fault Managment MOSCAD based

I know it must be Moscad, I will try moscad and see if i can get these to talk to each other.

The manual does not help in regarde to figuring out the logical address for I/O's. If i get this figured out i will POST

Thanks

Brent

 

0 Kudos
Message 3 of 4
(5,985 Views)

Found out using Driver for MOSCAD there must be some type of communication(s) going on I now get a  Socket Communication error 10061: connection refused

 

0 Kudos
Message 4 of 4
(5,984 Views)