vision builder

[OpTech]

I want use a global virtual channel in Vision Builder. I can create a Global Virtual Channel in MAX, but it doesn't show up when I to Vision Builder. Is this because I can't save the Global Virtual channel in MAX?

[luissg]

Hi,

Make sure you have Vision Builder 2012 installed and the latest DAQmx driver. Please also refer to the following links for additional information regarding virtual channels.

Vision Builder For Automated Inspection

http://download.ni.com/support/softlib//vision/Vision%20Builder%20for%20Automated%20Inspection/2012/...

Virtual Channel

http://digital.ni.com/public.nsf/allkb/31C55E253B023189862569850068B8AE

http://zone.ni.com/reference/en-XX/help/370466V-01/mxcncpts/chans/

How do I communicate between Vision Builder and a Data Acquisition device

http://forums.ni.com/t5/Switch-Hardware-and-Software/how-do-i-make-connection-between-Vision-Builder...

http://digital.ni.com/public.nsf/allkb/33364C17A30E3268862570890079DBD6?OpenDocument

[OpTech]

Thanks!