12-19-2016 02:47 PM
hi;
i'm niew on labview, blease help me:
i'm going to read a signal from an industrial regulator widh sireal visa and Displayed it in an array but it isn't working. The display was Characters not Recognized.
thanks for help
12-19-2016 03:37 PM
We are going to need a little more information
What device or instrument are you reading?
Attach some code of what you have tried.
12-19-2016 03:52 PM - edited 12-19-2016 04:12 PM
12-19-2016 03:56 PM
So you are saying it is returning data in Hex format and you want text? Or do you want numeric data that can be graphed or displayed in a numeric indicator?
12-19-2016 04:05 PM
I received from the regulator a frame by serial communication and i want to display it in array 2D on hexadecimal
12-19-2016 04:07 PM
I am sorry I do not understand what you are attempting to do here.
Please post your code, or at least what you have deon so far, and maybe I can figure out what you want.
12-19-2016 04:21 PM - edited 12-19-2016 04:22 PM
I received from the regulator a frame by serial communication and i want to display it in an array 2D in hexadecimal, i'm use the Visa
12-19-2016 04:24 PM
@mouhamedgmail wrote:
I received from the regulator a frame by serial communication and i want to display it in an array 2D in hexadecimal
That really does not tell me anything I need to know.
You haven't stated what the instrument is nor have you posted any code, so I can not offer any more help at this point.
12-19-2016 08:25 PM
What is the format of the data frame from your instrument? And do please post some code so we understand where you are at.
12-20-2016 01:53 AM
Hi crossrulz;
The format of the data frame from my instrument is hexadecimal, i want to display in an array but it doesn't. Despite it does when i display it in simple read beffer (when i use the hex en his properties).
cordially.