09-06-2016 04:42 AM
Hello everybody!
I got a myRIO system from my university and we want to build a small autonoumos robot. We use LabView 2015 for myRIO.
Everytime when i connect to my myRIO system, the whole LabView Software freezes. But after ~3min the programm runs without problems. What could be the problem? All my colleagues click on run and it needs ~10s and the programm is running. I also tried reinstall the whole software package but the problem still exists. Maybe anyone can help me. Thanks!
Best regards, Patrick
09-06-2016 06:44 AM
How are you connecting to the myRIO?
The 10s to start running could from trying to load the program into the myRIO. It would be slower with a bad wireless connection (assuming you are using the wireless and not the USB).
09-06-2016 07:04 AM
LabView freezes when I try both. Wireless or USB.
I klick on "connect" or "run" to load the programm into the myRIO and then it happens. During the freeze i tried to ping the IP adress of the myRIO and i had <1ms and no package lost.