08-14-2014 11:50 AM
hi,
I am new to labview. I am using NI 6216 usb Daq card for my application. I am getting data from 16 strain gauges with the help of wheatstone bridge. I want to know how should i start. Any useful tutorial for NI6216?
08-14-2014 03:03 PM
Lots of tutorials. Here is the standard set of links I provide for people wanting to know more about LabVIEW and the environment.
3 Hour Introduction http://www.ni.com/white-paper/5243/en/
6 Hour Introduction http://www.ni.com/white-paper/5241/en/
LabVEW Basics http://www.ni.com/gettingstarted/labviewbasics/
Self Paced training for students http://www.ni.com/academic/students/learn/
Self Paced training beginner to advanced, SSP Required http://sine.ni.com/myni/self-paced-training/app/ma
LabVIEW Wiki on Training http://labviewwiki.org/LabVIEW_tutorial#External_L
But since you asked specifically about DAQ there are a few more things you might find useful.
http://www.ni.com/white-paper/5434/en/
Also in LabVIEW go to Help >> Find Examples. There you can search for DAQ or DAQmx but what might be more useful is to go through the categories of Hardware Input and Output >> DAQmx. You'll probably be interested in taking finite analog measurements.
Unofficial Forum Rules and Guidelines
Get going with G! - LabVIEW Wiki.
16 Part Blog on Automotive CAN bus. - Hooovahh - LabVIEW Overlord