how to secure BNC-2090A digital output wiring

[simimasa]

Hi, I'm working on using the DAQ digital output to control the DAC digital input, but I have a problem on how to secure the wiring for the digital output to DAC. As when I plug the cable to the hole, it's loosely connected. Any suggestions on how to secure the wiring are appreciated.

Thanks in advance!

[RavensFan · Accepted solution]

It's a spring terminal.

Try pushing in the orange tab with a screwdriver while pushing in the wire.  Let go of the tab before letting go of the wire and it should grab and hold the wire.  It may be a case of lifting up the orange instead of pushing it in.  You should be able to figure it out.

[simimasa]

It works. Thank you!