From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
02-25-2015 07:18 PM
Hi i need to create dual monitor appication ..
here i wants to show outputs in one monitor and input panel in another monitor ..
like i need to have two front panel for one applcation .
How to do this ?
Solved! Go to Solution.
02-25-2015 08:38 PM
Create two VI's. One VI can call the other and have tell it to open the front panel when it is called.
The question is ultimately what you want to do in each window. What happens if you try to close one window, or the other? Will that be a problem for you app? You will need to handle the panel close? app event so you don't run the risk of shutting down half your application by accidentally closing one window.
02-25-2015 09:35 PM
02-25-2015 09:50 PM
Like this
02-25-2015 10:09 PM
02-25-2015 10:19 PM
Apply the same concepts.
Have one VI pass data to a different VI. I showed the way by using queues. You could also pass references to controls form one ot the other.
02-25-2015 10:20 PM
okay sure
04-02-2015 12:05 AM
I have a problem. I use 2 subVIs to display 2 diferent graphs. I set them to open the FP when called.
The issue is I cannot minimize the FP window for a while. After one loop, the FP is called and appear again and again. If delay time is short, the window is blinking.
Is there any solution to display the FP of all subVI and minimize them when I want?
Any help is appreciated.
Thank you!
04-02-2015 12:53 AM
try This ..
04-02-2015 01:02 AM
Hi Modification done with previous is after loop i need to do close fp.
added modifed file below.