LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

graticule or horizontal/verticle ruler in image display

Hi all,

 

Is it possible to put a graticule, ruler or horizontal and vertical ruler embedded in the image display.basically overlaying the image display .

Please let me know

 

- Thanks

0 Kudos
Message 1 of 4
(2,235 Views)

Hi, 

 

I noticed that you have another active thread on overlaying a grid on an image: http://forums.ni.com/t5/LabVIEW/Ruler-or-scale-in-a-image-display-window/m-p/2507120

 

Do you have any further questions on this topic?

 

 

Trevor B.
PSE
National Instruments
0 Kudos
Message 2 of 4
(2,201 Views)

@Trevor-B wrote:

Hi, 

 

I noticed that you have another active thread on overlaying a grid on an image: http://forums.ni.com/t5/LabVIEW/Ruler-or-scale-in-a-image-display-window/m-p/2507120

 

Do you have any further questions on this topic?

 

 


Hi Trevo,

 

I am able to put the x y grid using overlay line on an image display as of now this is fine for me and worsk fine for me, but for future reference is it possible to put scale, like a graticule or four coordinate scale on an image/video display indicator.

 

Thanks,

0 Kudos
Message 3 of 4
(2,191 Views)

HI,

 

It would be helpful if you post some pictures showing what you are interested in. 

 

Additionally, if you are referring to the indicator on the vision palette, and especially if you are working with the Vision Development Module, you should post to the machine vision board here: http://forums.ni.com/t5/Machine-Vision/bd-p/200

 

 

Trevor B.
PSE
National Instruments
0 Kudos
Message 4 of 4
(2,176 Views)