From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
I am using the modbus lib for the FPGA. Using the lib to connect to a ABB acsm1 -04 drive. I can write to the registers 16 or 32 bit addressing, and run the motor connected to drive.
But when i try to read from the holding registers, whether its 16bit or 32 bit addressing, data returned its not making any sense!!!