USB-6215 with Dynamic Tasks and LabView Mobile

[AEwing]

Information in Dev. Zone appears to be contradicting, regarding this.

Is it possible to use USB-6215 with WinMobile 5 or 6 and LabView Mobile with Dynamic Tasks??

The following NI page "Performing Handheld Measurements using LabVIEW Mobile and NI USB Data Acquisition Devices" http://zone.ni.com/devzone/cda/tut/p/id/7705

suggests that this is supported.  Table of supported devices includes the USB-6215, but saying it is supported only with dynamic tasks.

But this other page "Differences Between Static and Dynamic Tasks in NI-DAQmx Base"

http://digital.ni.com/public.nsf/allkb/455824867BE50ED68625747F005A8B17

suggests otherwise, saying "Other devices (including M Series PCI/PXI, USB-621x, etc) are NOT supported by the NI-DAQmx Base Task Configuration Utility or NI-DAQmx Base static tasks."

These refs are both to DAQmx Base 3.2.

My intent is to use DaqmxBase 3.2 & USB-2.0, but am interested if USB-1.1 works as well.

Thanks,

Al

[AEwing]

Clarification:  I just noticed that the last quote says "NI-DAQmx Base Task Configuration Utility" which is consistent with not supporting Static Tasks.

But it still doesn't list whether Dynamic tasks are suppported for USB-6215.

Thanks,

Al

[Jeremy_B]

The original KB you linked to does specify that the USB-6215 supports dynamic tasks.