Selecting a custom runtime menu makes it so that the VI cannot be saved

[RichardBoycott]

Whenever i try to save a VI with a custom runtime menu i get the attached 2 errors, oneter the other. This is using Labview 2014. any help would be much appreciated. Ther is of course not any invalid characters in the file name i am using.

Richard

[Norbert_B]

Can you provide a step-by-step description on how to reproduce the error?

I tried with a little "empty" approach with no avail. It works as expected.

Norbert

[RichardBoycott]

Im just doing the following 

Edit > Run TIme Menu

in the new window

Select custom >Application Item > File > Entire Menu (can select anything here, makes no difference)

then

File > Save As (mtoc.rtm in this case, same directory as the vi it is for)

Close out window

Select Yes in the "change runtime menu to MTOC.rtm" popup

File Save on the main VI then produces the two errors above, one after the other

Regards

Richard

[Norbert_B]

That's pretty much the same what i did, except i used a blank VI. Can you verify if the issue is connected to EVERY VI on your machine or connected to specific ones?

Norbert

[RichardBoycott]

This happens in every VI, in every project i have tested as well.

Richard

[Norbert_B · Accepted solution]

Can you please run a repair install on your LV 2014 installation?

Norbert

[RichardBoycott]

After a very long and boring afternoon of swapping what feels like 500 different versions of labview instrument driver discs for the instalation repair, it is done, and now working as expected

thanks for the help Norbert

Richard