10-06-2015 10:21 AM
Hi!
I am integrating acceleration signals to get the displacement but I am getting quite lower displacements than the actual ones. To do so I have to scale the signal to engineering units and I really do not undesratnd the input dB reference [EU]. What's the meaning of it?
I had a look at this post:
but I still cannot really get it.
Thanks!
Solved! Go to Solution.
10-08-2015 04:02 AM
Hi Cobayatron
This page provides a bit more explanation of what the different inputs of the VI relate to:
http://zone.ni.com/reference/en-XX/help/372416J-01/sndvibtk/svl_scale_voltage_to_eu/
Hope this helps a bit!
10-08-2015 05:01 AM
Hi Joe,
Thanks for the link! I've been reading about it from different sources and I think I get it now. Anyhow, it would be easier to create the channel with the appropiate settings from the very beginning and forget about it hehehehe.
I also found a table for reference values in case someone need its:
Thanks again!