From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
I'm modeling robot from wrl files (previously converted from igs by Solid Edge). Mass is correct. I have that problem when I start simulation (only if I declared Inertia Matrix - I previously calculated it in Solid Edge).
Can you use another type of file? I was able to use drawings from solidworks and then use the Robot Simulation Model Builder to assemble the arm. Here is all the Information that you need.
