From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Ok, here's what I need a VI to do: 1. Read an input text file (sample attached) of voltage to output to the laser. 2. Output the values to the laser at a specified rate (use 1000Hz for the sample file) 3. Repeat either continuously or for a specified number of iterations.
I think you forgot to attach that text file, but there is plenty of information about reading text files that I would recommend you checking out. The best thing to check out would be the examples that ship with LabVIEW, which can be accessed by going to Help>>"Find Examples...". I have also linked the help documentation on reading text files here. As for the analog output portion of your question, I would recommend posting any DAQ-specific questions in the DAQ area of these discussion forums!
Kind Regards,
E. Sulzer Applications Engineer National Instruments
