Benchtop Measurement and Test
Distributed Measurement and Control
High-Performance Test
Systems Engineering Software
Perspectives showcases how NI sees what’s next in the world of test and technology.
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
11-24-2012 06:14 AM
各位好!有人使用过Newport Optical Power Meter 1830-c吗?或者1830-R?
本人最近想通过NI的PCI-GPIB卡和Newport Optical Power Meter 1830-c进行GPIB通信,来用waveform chart实时显示光功率计新采集到的功率,目前已经安装仪器驱
动(把Power Meter1830-C的仪器驱动拷贝到Labview\user.lib目录下),可以实现和光功率计的连接。
现在存在的问题如下:我新建了一个空白VI,然后调用np 1830c的“New Valid Reading From 1830-c.vi”, 在前面板添加waveform chart显示采集到的波形,程序运行后,可以看到波形图上经常会出现"0",请问这个问题该如何解决?这个跟采集时间有关系吗?我看“New Valid Reading From 1830-c.vi”里面有个Timeout=500的时间可以修改?
非常谢谢!
11-26-2012 09:27 AM
Hello Skyview
Please post you question at the NI CHINA FORUM:
http://forums.ni.com/ni/?category.id=ZHSForum
Regards
Mart G
11-26-2012 08:19 PM
Hi! Mart G,
Sorry for the mistake and I already posted it at the NI China Forum. Finally the question was solved.
Thank you.
What do you need our team of experts to assist you with?
Thanks!
We'll be in touch soon!