From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
01-19-2016 03:29 AM
Thank you for your help.
I found the problem! In a mituotyo parameters, there are 2 output mode SPC and RS232.
If I choose RS232 mode and I write GA00\r, the respons is 911
If I choose SPC mode and I write GA00\r, the respons is 01A+0000.032 when on the mitotuyo screen the value is 0.032 mm!
I don't understand why I must to be in SPC mode to communicate...
Now I will try to extract only the value in millimeter of the read buffer
03-02-2017 01:31 PM
Hi Rico, I have the exact same input tool and I cannot get it to communicate at all. I'm new at Labview but I've been looking over several different examples. If you got this to work, I'd appreciate your help.
Thanks,
03-03-2017 02:26 AM
Hi,
Try this vi.
03-03-2017 09:25 AM
I need to configure for a USB RAW input and for some reason I'm getting an error in NI MAX "VISA (Hex0xBFFF003E) Could not perform operation because of I/O error"
03-03-2017 09:31 AM - edited 03-03-2017 09:37 AM
Have you installed the drivers?
http://www.mitutoyo.eu/en_us/downloads/software-and-updates/
I'm not English, why do you speak of RAW? for me, it's picture format.
for the USB parameter, I have that:
9600 bauds, 8 bits, none, 2 bits Stop
but you can change it directly on mitutoyo.
03-03-2017 10:14 AM
According to Mitutoyo, drivers are provided since this is an Human Interface Devise.
03-06-2017 11:24 AM
One last question, did you use an input tool with your project, like the IT-016U? Or just the dial indicator directly to the computer.
Thanks,
03-07-2017 02:27 AM
No, I didn't use IT-016U or the dial indicator.
I have this DMX-1 USB between the pc and mitutoyo.
http://mitutoyo.incony.de/web/mitutoyo/en_GB/mitutoyo/01.01.053/DMX-1%20USB/index.xhtml
03-07-2017 09:13 AM
Thank very much Joan!!! I spoke to the Mitutoyo reps and no one mentioned the DMX-1. I appreciate all your help.
Gracias,
03-07-2017 10:42 AM
I was looking around and Mitutoyo doesn't sell this product in the United States. 😞