03-23-2011 03:53 PM
I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.
03-24-2011 12:13 PM
Here is how to use the PLL. But I don't know of how to interact with that device 🙂
http://zone.ni.com/devzone/cda/tut/p/id/3781
And for thouse who don't know what a PLL is a free bonus link is here:
http://digital.ni.com/public.nsf/allkb/07BC8D77D4E9AE258625708B007CE74F?OpenDocument
🙂
and a second one on what that device is: http://www.hittite.com/products/view.html/view/HMC702LP6CE
Now we are all caught up to speed.
09-23-2017 12:14 PM
Hi There, did you have any luck with controlling the Hittite vco using labview?
Any information would be helpful,
Thank you.
09-23-2017 12:27 PM
Is there anyone in your organization who is experienced with LabVIEW Development? From the very little information you provided in your question, I suspect you would be best served by someone who could spend the time to learn what all the terms in your Title (which also seem to be your entire Post's message) signify and could understand the system(s) with which you will be working. You could also check the "LabVIEW Developers Seeking Employment" Forum here.
Bob Schor