07-10-2007 06:06 PM - edited 07-10-2007 06:06 PM
1. Open blank VI
2. Import Picture to Clipboard
(menu:Edit): pipe.png
3. Paste onto front panel (ctrl-V)
4. Save (any file name)
5. Save As -> Copy -> Open
additional copy -> (any file name)
Crash! - the two error messages are attached. “Load Error”
http://forums.ni.com/attachments/ni/170/258170/3/error1.jpg
http://forums.ni.com/attachments/ni/170/258170/1/error2.jpg
Both files are then corrupt.
Any advice would be greatly appreciated.
Additional Notes:
- System: Windows XP
- Labview Version 8.2 (also tried on
version 8.0 on another computer running XP)
- corruption only seems to occur with
the attached image “pipe.png”
Message Edited by FMonkey on 07-10-2007 06:07 PM
Message Edited by FMonkey on 07-10-2007 06:08 PM
07-10-2007 06:16 PM
07-11-2007 08:37 PM
Hi FMonkey,
I was able to reproduce the issue and have filed a report (#4BAHL189) with R&D for further investigation. Thank you for the feedback.
Regards,
Elizabeth S.
Application Engineer
National Instruments
07-12-2007 01:50 PM