Benchtop Measurement and Test
Distributed Measurement and Control
High-Performance Test
Systems Engineering Software
Perspectives showcases how NI sees what’s next in the world of test and technology.
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
09-18-2014 02:57 AM
Hi GerdW,
it's the First time i used the NI 9401 module, i had compiled and run the code on the RT side, but reived nothing on the output of the module.
in the module what is the need for the com pins (i know they are grounds) , is each DIO have it's com pins?
and when we use the DIO pins, can we connect all the com pins to the ground of the compact rio.
Regards,
SASA
09-18-2014 03:06 AM
Hi SASA,
see the manual of the 9401 module: page 10 and 18.
09-18-2014 03:37 AM
HiGerdW,
so COMs are Overvoltage protection and they are not necessary when we use only DIO 0 , 1 , 2 , 3 as output.
What do you need our team of experts to assist you with?
Thanks!
We'll be in touch soon!