Benchtop Measurement and Test
Distributed Measurement and Control
High-Performance Test
Systems Engineering Software
Perspectives showcases how NI sees what’s next in the world of test and technology.
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
06-16-2013 12:09 PM
Hi,
I am struggling with trying to communicate with the Danfoss inverters myself.
Did you try out their USB-RS485 converters, and if so, did it work?
My problem so far is that whatever I send I only get \00 in return.
06-16-2013 04:15 PM
Unfortunately, I did not have time to try it.I'm Also not sure how port 2 must be terminated.
02-07-2015 05:30 PM
Did any one MAKE progress in that area?
Has the comlynx protocol state it seems that the data exchanges are based on a HDLC protocol.
I got a comprehensible answer if I send at 19200 b 8N1 the following ping message (broadcasts) :
in HEX "E7 FF 03 00 02 FF FF 00 15 B1 8B 7E"
This has to be done during day time as the inverter is off at night and won't answer!
02-09-2015 12:44 AM
No progress from here, lack of time
What do you need our team of experts to assist you with?
Thanks!
We'll be in touch soon!