From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
10-01-2013 02:39 AM
Is it possible to change IP address for NI-sbRIO9606 in labview code?
I am using LV2012.
10-01-2013 03:19 AM
Real-Time>>Utilities>>RT Apply Target Network Setting.vi
10-01-2013 04:07 AM
I don't have that vi in my functions.
10-01-2013 05:01 AM
You need to install LabVIEW realtime.
10-01-2013 09:43 PM
You could also try configuring remote target using network browser, https://decibel.ni.com/content/docs/DOC-12773.
10-10-2013 01:20 AM
I have realtime module installed.
Using browser is not an option, I need to change ip address programmatically.
10-10-2013 01:26 PM
JuhoR,
You can also use the System Configuration API to change the IP Address. I would recommend taking a look at the this example. It looks like they are doing something similar to what you are looking for. You can also change the IP address by accessing the sbRIO through FTP and modifying the NI-RT.ini file. The bottom half of the KB walks through that process.
Best,