02-24-2014 12:45 PM
Hi
Has anyone has a VI for reading temp from the ADT7310 temp sensor. I am not very familliar with SPI com
http://www.analog.com/static/imported-files/data_sheets/ADT7310.pdf
Thanks
02-25-2014 06:40 AM
Hi there,
Here is an article on the SPI protocol and how it can be acheived in LabVIEW.
http://www.ni.com/white-paper/9119/en/#toc3
The manual you have linked seems to cover how communication with the device including reading and writing data.
I was not able to find any drivers for you device on our instrument driver network - possibly you could try requesting one.
http://www.ni.com/devzone/idnet/idnet.htm
There are however drivers for other Analog Devices hardware.
I hope this helps