12-08-2015 09:13 AM
G`Day guys,
I`ve got a 2D Array inlcuding the values for a 3D Surface-Graph.
I like to get a 2D picture where die Z-Axis ist interpretated by the color.
I tried on my own, but failed to get the right conversion between the Z-Value and a color.
I suggest I have to modifie the values (range 30000-35000). Probably LabView tries to interpretate the value directly as a color code.
The picture itself has the right dimension (1280*100)´.
The upper graph shows the 3D-Graph feeded with the same information.
Any suggestions how to get the right image?
Thanks 🙂
Solved! Go to Solution.
12-08-2015 09:22 AM - edited 12-08-2015 09:22 AM
Please post your code with sample data, I'm using LabVIEW 2014.
12-08-2015 09:36 AM
Here are my VI and the used .lvm. It was written by the "Write into measurement file" VI before.
12-08-2015 10:37 AM
If your data is intensity data, (not RGB data), then you can wire it directly into an intensity graph. Change the colorbar so that the max is around 35000.
12-08-2015 10:42 AM
12-09-2015 03:56 AM
Thanks mate! Thats the one I needed.
Cheers