From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Available in LabVIEW 2019 and later. Right-click on one or more conversion bullets and select a new bullet type from the 'Replace Conversion' submenu.
Browsing through menus to replace a numeric conversion node is tedious. How about allowing the selector tool to select from a pull-down menu, just like it does from an unbundle by name node?
Existing unbundle node behavior is shown at left. Desired numeric conversion node behavior is to the right.
Leave this idea here. Altenbach's idea has over 100 kudos but it's over 3 years old. Might have lost some momentum. This is something I've wanted for a long time, BTW.
PaulG.
LabVIEW versions 5.0 - 2020
“All programmers are optimists” ― Frederick P. Brooks Jr.
Jim_Glanz, then what's stopping you from giving the idea a Kudos? A comment saying "good idea" will not give NI any idea of how desirable the idea is. That what the Kudos are for. So if you like the idea, give it a Kudos.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions Unofficial Forum Rules and Guidelines "Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
Available in LabVIEW 2019 and later. Right-click on one or more conversion bullets and select a new bullet type from the 'Replace Conversion' submenu.