LabVIEW Communications System Design Suite

cancel
Showing results for 
Search instead for 
Did you mean: 

How to fix .NET Reference error in TLA5201 logic analyzer using Macbook OS X10

Solved!
Go to solution

Dear Labview users,

I am trying to use the TLA5201-Logic Analyzer with Labview 14.0.1 on Macbook with OSx.10.11.2 operating system. After installing the labview drivers from the link posted above, the example VIs are not compiled successfully. It seems to have problems with .NET reference. I have been searching thorugh lots of Ni forums but they didn't seem to help at all as they were all based on Windows based operating system. Any help or suggestion on solving this issues would be very helpful. I am even wondering if anyone outhtere was able to even compile any of the example VIs given for TLA5201 logic analyzer? Please let me know. Thanks!

 

0 Kudos
Message 1 of 4
(4,326 Views)

Hi dr3patel,

 

This is the LabVIEW Communications forum for wireless prototyping; I would post on the LabVIEW/instrument control forums if you want people to see your post!

 

Cheers,

Rahul B.
0 Kudos
Message 2 of 4
(4,323 Views)
Solution
Accepted by topic author dr3patel

Here the link:

 

http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/bd-p/140

 

Regards,

 

Thomas C.
FlexRIO Product Support Engineer
National Instruments
0 Kudos
Message 3 of 4
(4,320 Views)

apologigies for posting into the wrong forum. Will post this question in LabVIEW/instrument control forum.

 

Thanks!

0 Kudos
Message 4 of 4
(4,313 Views)