Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

gpib explorer communication ok with ENET/100 but NOT with ENET/1000

Hi,

 

I am having trouble with gpib explorer and ENET/1000 communication.

 

I can happily communicate with ENET/100s, but cannot communicate with ENET/1000s. symptoms are as follows:

 

Searching the network for GPIB controllers does not show ENET/1000s.

I manually add the ip address (using gpib explorer and selecting enet/1000) and the message comes back that there is no such device (though I can access the configuration page through a browser).

I then tried to add manually again, but this time telling gpib explorer that the controller is an enet/100. The message comes back that this device is not an enet/100, which tells me that there is some kind of communication.

 

I also explicitly opened the ports listed in this http://www.ni.com/white-paper/12402/en/#toc3 recent white paper from NI (UDP port 44525 and TCP 5000, 5003, 5005, 5010, and 5015)

 

I am running on 64 bit Red-Hat with the latest ni4882 and firmware and both devices are on the same subnet.

 

All help appreciated,

Christina

0 Kudos
Message 1 of 4
(3,882 Views)

More info:

 

Running on Red-hat enterprise linux 6.6

 

New things tried:

 

Taking the firwall down completely and then connecting

Installing ni4882 v 3.2 for linux instead of the most up to date 15.1

 

No luck

0 Kudos
Message 2 of 4
(3,822 Views)

SOLVED: Issue addressed in realease 15.1.1 of ni4882 for linux

0 Kudos
Message 3 of 4
(3,541 Views)

Partially addressed in realease 15.1.1 of ni4882 for linux

0 Kudos
Message 4 of 4
(3,531 Views)