VISA Serial Port Write Error-1073807360

[SergioMa]

Can somebody give me some hints what mainly causes the error code in subject?

Thank you very much!

[Albert.Geven]

Most of the time a bad cable between what you don't specify and VISA

[Vasileios.T]

Hi,

I am Vasileios, an Applications Engineer with National Instruments. I am happy to assist you regarding your query.

According to this knowledge base article, linked below, the error-1073807360 is caused from the selected number of data bits. The data bits must be 5 to 8.

http://digital.ni.com/public.nsf/allkb/D2084EC381319CC386256A1D006F1415?OpenDocument

If you select to use 5 data bits you can either use 1 or 1.5 stop bits.
If you select to use 6, 7 or 87 bits, you can use either 1 or 2 stop bits.  

I hope this will be helpful.

Regards

[dpths3]

Thank you for your answer. 

I am facing same problem with the data bit is 8 and stop bit is 1. 

Can anyone help me to fix this issue. 

[K C]

Maybe you should start e new thread and tell a bit more about your problem: are you using LabVIEW, what kind of interface, what kind of device or instrument, etc., etc.