07-24-2015 03:15 AM
Hello,
I have a problem with the XG SORENSEN DC power.
I want to pilot this DC power with Labwindows but befor testing this. I begin to control with MAX logiciel.
I have installed the FTDI virtual port driver. I see the new port in Windows when the DC power is ON (COM4)
But in MAX, i don't see this instrument
MAX does not detect the materiel and when I create the new object, the logiciel can not open a VISA session.
I have read the user manuel but they are nothing. I have configured all that they are described in the document (Install VCD and configure the DC power in USB)
Any help or suggestions appreciate, i have used all that I know.
Thanks in advance for your help
Stephane
07-24-2015 06:29 AM
07-24-2015 07:57 AM
I have re-installed NI-VISA 14.0.1 version 5 minutes ago
The COM port was appears (a problem with my AGILENT GPIB card driver) but a time out appears when I send an IDN? query
I have configured the com with the user manual.
I work with WINDOWS 7 64bits, Labwindows CVI 2013 SP2 and NI-VISA 14.0.1
I have joined two display captur of the VISA interactive control