Instrument Control (GPIB, Serial, VISA, IVI)

[Albert.Geven]

Hi

why can't it work?

and it seems you really are in a hurry after a few weeks silence

[ankitsharma]

i tried a lot,it can not change the value of resistence of digi pot mcp41010..can you give me the right programme...

[dalvares]

Hi Albert, Sorry I think there is some confusion. Its another user who seems to be in a hurry after not myself.  I haven't had the chance to look back on it and it seems like I might not need it after all as I just purchased a couple of ICs that can better solve my problem. 

Ankitsharma. I suggest using possibly the 7555 as your clock signal 

Cheers, 

Darren 

[ankitsharma]

can you briefly tell me,how can i use 7555 to generate the clock

[smercurio_fc]

---

ankitsharma wrote:

can you briefly tell me,how can i use 7555 to generate the clock

---

Perhaps you should consider actually looking at a datasheet?

[Albert.Geven]

sorry Darren, did not look deep enough

[kamil8]

hello

I know this is a fairly old post but I have a similar problem to control digital potentiometer with USB 6008 now. I also use SPI digpot

Did you succeed to change digital potentiometer resistance with USB 6008 using RS232? Can you give me clues about how can I do it? I don't quite understand with the attached files in this thread

I'm very stuck now

thank you

[kamil8]

or did you just use arduino?

[Daniel-E]

Hi kamil8,

To be clear, are you using LabVIEW, or another NI software product to communicate with the digital potentiometer, or is this a separate program using the DAQmx API?

I might suggest making a new thread for your question so that other forum responders can see that you have a new question and be more able to help you out, even if the question is similar (as you said, this is a fairly old thread).