NI Home
Cart Cart | Help
Hello Events Academic NI Developer Zone Support Solutions Products & Services Contact NI MyNI
You are here: 
NI Home > NI Developer Zone > NI Discussion Forums


Reply
Member
Jorge_Valerio
Posts: 3
0 Kudos
Accepted Solution

¿Is it possible to connect a cDAQ-9174 with a NI TPC-2206 or NI TPC-2212?

Hi,

¿Is it possible to connect a CompactDAQ USB (cDAQ-9174) in a USB port of TPC-2206 or TPC-2212? ¿Did anybody try it before?

Thanks.

Ing. Jorge Valerio Araoz
Ingeniero de Ventas
SOCIEDAD INDUCONTROL INGENIERÍA S.A.C.
http://www.inducontrol.com.pe/
jvalerio@inducontrol.com.pe
Celular/RPC: +51-986666633
RPM: *271058
Teléfono: +511-4405225
Calle Manuel Fuentes 976B - Lima 27 - Perú
"No es lo que hacemos, es lo que hacemos posible." - National Instruments

Member
Diogo_Ap.
Posts: 120

Re: ¿Is it possible to connect a cDAQ-9174 with a NI TPC-2206 or NI TPC-2212?

Hi

 

      It's possible, Windows XP Embedded provides users the ability to develop on a desktop PC and quickly deploy on an embedded target. With NI-DAQmx on Windows XP Embedded, developers will have access to common programming languages such as C++ and .NET.

 

folow the link for your query: http://www.ni.com/white-paper/7757/en

 

 

Best Regards

By using this web site, you accept the Terms of Use for this web site. Please read these Terms of Use carefully before using any part of this site. Please go here for information on ni.com's copyright infringement policy.
My Profile | Privacy | Legal | Contact NI © 2011 National Instruments Corporation. All rights reserved.    |    E-Mail this Page E-Mail this Page