Showing results for 
Search instead for 
Did you mean: 
Reply

Using NI-5641R with both FPGA and the instrument driver

Solved!
Go to Solution

Using NI-5641R with both FPGA and the instrument driver

Hi,

 

I've "inherited" a NI PXI-5641R with a FPGA code acquiring spectrum and performing FFT on both inputs.

However, it has another two outputs I would like to use for simple DC biasing.

Would it be possible to use the instrument driver to apply DC voltage on one of the outputs while the FPGA for the inputs is running simultaneously?

 

Thanks,

Ran

0 Kudos
Message 1 of 3 (3,954 Views)
Reply
0 Kudos
Solution
Accepted by topic author rvardimon
‎08-27-2015 06:09 PM

Re: Using NI-5641R with both FPGA and the instrument driver

Hi Ran,

I do not believe what you have describe is possible for two reasons.

  1. You cannot run the instrument driver bitfile at the same time as a user defined FPGA bit file
  2. The AO ports are AC coupled so you will not be able to generate a DC bias on them. 
JaceD
Signal Sources Product Support Engineer
National Instruments
0 Kudos
Message 2 of 3 (3,950 Views)
Reply
0 Kudos
Highlighted

Re: Using NI-5641R with both FPGA and the instrument driver

OK, thanks!

 

Ran

0 Kudos
Message 3 of 3 (3,946 Views)
Reply
0 Kudos