cFP-PWM-520 channel sincronization

[pedroc2]

     Hi

             I have a cFP-PWM-520 module been controlled by Labview 8.5 but, I can not control the phase of each output channel, Is there any way to do i?, I have been trying with delays in the code but seems that the module has its own phase associated to each each channel.

 Thanks

 Regards

 Pedro

[RTPAX]

By phase do you mean channel acquisition rate aka channel update rate? 

[pedroc2]

Hi, what I mean is, to control the start of the PWM signal at different time in each channel, let's say, CH0 starts at time =0 sec, CH1 starts at time = 0.003 sec, CH3 at 0.006 sec. etc. this needs to happen every 30 msec.

I need to avoid overlapping of the signals. ON time is 2.5 ms.

[Wayne.C]

It does not appear that you can control this.  See this post.  http://forums.ni.com/ni/board/message?board.id=110&message.id=1396&requireLogin=False

[pedroc2]

Thanks for the info Wayne.

Pedro