FieldPoint Family

cancel
Showing results for 
Search instead for 
Did you mean: 

FieldPoint linear coefficients configuration

Sorry - cross posted on LabVIEW.
 
LabVIEW 2009 SP1 Pro, FieldPoint 6.0.9, MAX 5.0:

 

FieldPoint: Is there a way to programmatically access (configure and read) the linear coefficients found on the Scales tab for any particular channel (e.g. MAX\My System\Data Neighborhood\FieldPoint Items\<configName>\cFP-AI-100 @1\Channel 0)?

 

Three special-function VIs exist in the FieldPoint\Advanced\Advanced Ethernet palette.

Configure Range.vi, Configure Atttribute.vi, and Configure deadband.vi use special extensions to the standard URL (Logos:\\FP\1AI\00) of \ConfiguredRange, \Attributes, and \DeadbandConfiguration, respectively, to programmatically configure these items (normally done in MAX or in a LabVIEW Project).

 

I assume there is a similar one for the scaling coefficients, and as my ESP powers have failed me lately, ... help?

 

Thanks, Dave

0 Kudos
Message 1 of 2
(5,380 Views)

Changing the scale would require changes to the IAK file.  Here is the forum post I am referencing:

http://forums.ni.com/t5/FieldPoint-Family/Field-point-scale/td-p/1156935

 

Also, you can programmatically change some of the channel attributes:

http://digital.ni.com/public.nsf/allkb/960F6F90436A1A1A86256FBA0062E463

Applications Engineer
National Instruments
0 Kudos
Message 2 of 2
(5,362 Views)