10-21-2015 09:48 AM
Hello,
I'm using (RSSOwl.exe) as a RSS client applicaiton. I have subscribed to RSS LabVIEW discussion forum but I'm only receiving the new feeds, the ones that have replies=0. I have tried with different RSS client with the same behavior.
Is there a way to change this behavior to receive all post on the LabVIEW discussion forum?
Thanks,
Michel
10-21-2015 10:47 AM
Hi Michel,
By default, the RSS feed only brings in the new topics. I am investigating if it's possible to subscribe to a feed of topics and replies. I'll let you know what I find out.
Thanks,
10-21-2015 01:32 PM
Hi Michel,
Unfortunately, it's not possible to view an RSS feed of topics + replies. It's possible to subscribe to RSS feeds for individual topics -- for example, if you wanted RSS updates rather than email notifications -- but you have to subscribe to these individually. There's also the page Unread Discussions - Posts view for the LabVIEW board, but there's no RSS feed for this.
Normally, I would raise the enhancement idea to our platform vendor, Lithium, but this idea was raised and declined in he past.
10-24-2015 08:50 AM
I knew this was possible but for everything (Not only LabVIEW Discussion...). I have the following RSS feed setup on one of my computer which will receive all port on NI Discussion Forums:
https://forums.ni.com/ni/rss/Community?interaction.style=forum&feeds.replies=true
The thing is that I don't remember where I took it, I can't find it neither... Anyway this works for me.
Best regards,
Michel
10-26-2015 09:39 AM
It looks like that is an RSS feed of this page: http://forums.ni.com/t5/forums/recentpostspage/post-type/message