Please note that the content contained in this document is out-of-date for the current competition season. Please feel free to use it as a reference moving forward.
Problem:
When I try to setup my AXIS camera from the 2010 FRC Control System Chapter 2 instructions on Page 58, I am unable to login to the camera using the following login information.
| Default Login
| Edited Login
| Added FRC Login
|
|---|
| User Name | root | root | FRC |
| Password | pass | admin | FRC |
Solution:
You can reset the camera to it's default setting by following the instructions below which can be found in the camera user manual.
- Disconnect the power cable.
- Press and hold the Control button while reconnecting power.
- Keep the Control button pressed until the Status Indicator color changes to amber (this may take up to 15
seconds). - Release the Control button.
- When the Status Indicator changes to green (which may take up to 1 minute), the process is complete and the
camera has been reset. The unit now has the default IP address 192.168.0.90
Axis Camera User Manuals:
