From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Does NI offer any signal conditioning for their dynamic signal boards? It does not look like the SCSI nor SCC offer the ability to connect to this card.
What I am measuring:
DC to ~22.4Khz +/- 550volts DC, relative to earth ground.
Also, does this board offer seperate gain-settings for each channel?
The intended use will be 2 channel measuring an audio bandwdith power amplifier; 2 channels from a B&K Nexus power supply ( +/- 10volts )
I would consider voltage and current transducers to attenuate the +/- 550V (AC) to +/- 10V, etc. There are a number of these available. Consider LEM, www.lem.com, or Ohio Semitronics.
prestonj
Preston Johnson Solutions Manager, Industrial IoT: Condition Monitoring and Predictive Analytics cbt 512 431 2371 preston.johnson@cbtechinc
