From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Community Discussion Forums Additional NI Product Boards Dynamic Signal Acquisition Topic

Dynamic Signal Acquisition

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Ni-DSA soft front panel does not work. It says "DSP personality loading", then freezes up.

Ni-DSA soft front panel does not work. It says "DSP personality loading", then freezes up.

‎10-08-2008 03:51 PM

NI PCI-4551 card is installed in the PC with NI-DSA v1.2. Labview 7.1 is also installed on the system. Until a couple of weeks ago, this problem never occured, and the system, other than windows (and corporate IT services) updates, nothing has changed on the system. The 4551 card checks out perfectly fine in MAX, and labview runs fine, but when DSA functions are used (including the DSA soft front panel program v1.2) the application using them hangs.

0 Kudos
Message 1 of 2
(6,205 Views)
Reply

Re: Ni-DSA soft front panel does not work. It says "DSP personality loading", then freezes up.

‎10-09-2008 01:16 PM

Hi jcory,

 

What version of Windows do you have and what is the latest update you recieved?

 

Is there another PC that we could try the board in?  That would isolate the problem to either software or hardware.

 

This problem occurs with our examples also?

Sincerely,
Jason Daming
Applications Engineer
National Instruments
http://www.ni.com/support
0 Kudos
Message 2 of 2
(6,190 Views)
Reply