Dynamic Signal Acquisition

Showing results for 
Search instead for 
Did you mean: 
Reply

Continuous Saving from DAQmx to a WAV File

Solved!
Go to Solution

Continuous Saving from DAQmx to a WAV File

I am trying to save a waveform that was recorded by a DAQmx device into a .wav file.  I have found two sample vi's that I used to start with.

 

Sound Input to File.vi

This vi saves the waveforms from a microphone input to a .wav file.  The nice thing about this vi is it has no limit on how long you can record.

 

SVXMPL_WAV Record (DAQmx).vi

The vi saves the waveforms from the DAQmx input to a .wav file.  The nice thing about this vi is it shows how to get the waveform through the DAQmx device, but you can only record for just over 1 minute.

 

 

DAQmx Input to File.vi

This was my attempt at combining the best things of the above vi's, but it doesn't work and I don't know why.  I'm hoping somebody can tell me where I went wrong and/or how to improve my vi.

 

Thanks

Number 6

0 Kudos
Message 1 of 11 (5,376 Views)
Reply
0 Kudos
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
Highlighted
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.