Dynamic Signal Acquisition

cancel
Showing results for 
Search instead for 
Did you mean: 

Advanced:Hardware Compare:Samples Compared

I want to get the output of the HSDIOInstrument HardwareCompare result for both fail and pass bits. How can i do that?
0 Kudos
Message 1 of 4
(5,531 Views)

Have you checked out this white paper?

http://www.ni.com/white-paper/7281/en/

 

 

Michael Keane
National Instruments
0 Kudos
Message 2 of 4
(5,501 Views)
Thank you Michael. But I was looking for the positon(cycle#) where I start to compare the output and end to compare the output. My goal is to know all the cycle # where I have compare statement (H or L) whether it fail or passes. I am getting an output, but it includes all the data where I don't have compare statements.
0 Kudos
Message 3 of 4
(5,493 Views)

Hi etho,

 

Is the SupportedDataStates property node set to L,H,X (resp only?)

Is the "Hardware Compare - Response Only" example similar to what you are looking for?  This is in the Example Finder at Hardware Input and Output >> Modular Instruments >> NI-HSDIO >> Dynamic Acquisition

Michael Keane
National Instruments
0 Kudos
Message 4 of 4
(5,480 Views)