Digital Multimeters (DMMs) and Precision DC Sources

cancel
Showing results for 
Search instead for 
Did you mean: 

Measurement & Automation Explorer Window flickering

Morning!
While using the Measurement & Automation Explorer, I encountered a flickering window:

[Measurement & Automation Explorer -> Remote Systems -> cFP Bank -> (Right click on any item) Go to Items Configuration -> I/O Data (Tab)]

This phenomenon appeared after updating from Windows XP to Windows 7.
It seems as if Windows 7 refreshes the window all the time. Is there anything to do about it? It's quite annoying to work with... 😕

 

Thanks for any ideas! 🙂

Korbi

0 Kudos
Message 1 of 3
(6,377 Views)

Good Morning,

 

I have never encountered anything like this. You can try some things to address he problem:

 

Do you have the Problem on another Windows 7 Computer, too?

When exactly does this occur? The way I understood it is as follows: You try to configure an ethernet cFP via network, right?

So when you configure the IO Data, you get the flickering window.

Personally I've never worked with a cFP on Windows 7, so I haven't ecountered that problem, but I think that R&D would have fixed it already, if it was a common Problem.

 

Also do you have the newest Version of NI-RIO and FieldPoint?

RIO

Field Point 

 

Additionally: What do you mean by Update to Windows 7?

 

Best regards,



Remember Cunningham's Law
0 Kudos
Message 2 of 3
(6,361 Views)

I am having the same problem after upgrading from WXP to W7 and from LV 2011 to LV2012.  Did you get any resolution for this problem? Thanks

 

 

0 Kudos
Message 3 of 3
(6,044 Views)