
You are here:	NI Home > NI Developer Zone > NI Discussion Forums

Digital I/O

Show: - -

Subject	Replies	Author	Kudos	Latest Post
Why does Write to Digital Line turn on unwanted lines?	2	RicK.	0	‎08-28-2002 11:01 AM by Molly K
32 bit wide burst mode output	1	uuu	0	‎08-26-2002 10:42 AM by Sastry V.
Digital Input with 6602, reading 1 Mhz serial Data	1	mario1976	0	‎08-20-2002 09:54 AM by bman
how do i perform buffered digital I/O using the PCI 6733 card	3	atlantest	0	‎04-22-2003 04:58 AM by Rolf_Weibull
How do I get callback or windows messaging Events working on a 6534 card do pattern output?	1	David Pettigrew	0	‎08-09-2002 09:07 AM by David Pettigrew
DIO-96 and MIO-16-XE-50	2	Arul Thangavel	0	‎08-08-2002 10:10 AM by Arul Thangavel
generating a pulse train on a DIO line	3	lisa	0	‎08-13-2002 12:41 PM by NJin
My delphi code only works in DAQ driver 6.6 but not in upper version. Why?	1	donald121	0	‎08-06-2002 10:55 AM by Filipe A.
Re-start Digital Pattern Generation	1	Amil	0	‎08-02-2002 02:22 PM by Russell
Is there a minimum usable buffer size using a PCI 6534 and NI-DAQ?	2	jwalsh	2	‎08-05-2002 10:39 AM by Filipe A.
How to generate a clock signal in LabVIEW?	2	FTajdar	1	‎07-31-2002 08:37 AM by Filipe A.
Using NI5911 with multiple triggers	1	raeletro	0	‎07-31-2002 11:35 AM by Annette Perez
What is the maximum data rate that i can achieve with DAQ6503 ?	2	SAlex	0	‎07-29-2002 10:13 AM by Filipe A.
pci6534 buffer memory	4	pblase	0	‎08-12-2002 03:45 PM by pblase
Configure GENERAL_DAQ_EVENT activeX object under Visual Basic	1	Anonymous	0	‎07-29-2002 10:54 AM by Sastry V.
How to use PFI1 or PF2 as digital output with Labview 6i on a NI5102 PCMCIA ?	3	liodel	0	‎07-29-2002 03:34 AM by LucaP.
Upgrade win98/LV4 to win2000/LV6: Speed problems with AT-MIO-16E	3	catox	0	‎07-30-2002 11:02 AM by Ben
How can I generate a PWM signal using one of the digital ports of AT-MIO-16E-10 ?	4	Antonios`	1	‎12-03-2002 11:55 AM by stefan!
MAX 2.2 refuses to see PCI-DIO-96	5	Paul_Conaway	1	‎07-25-2002 01:55 PM by Paul_Conaway
I am trying to acquire pulse signal (TTL 0 ,+5v) using parallel port (SPP 25 pins) on pin 12.	3	digital	0	‎07-23-2002 06:06 PM by Makra
How do I pass a com object to a callback function	1	cbrokke	0	‎07-23-2002 04:48 PM by mfukuchi
NI-DAQ 6.9.2, how do you install LabWindows/CVI 5.01 Borland DAQ Library? [ 1 2 ]	15	jhedr	0	‎12-03-2003 02:15 PM by Gman
How to Avoid conflict when read/write different Two ports on 6025E	2	wusheng	0	‎04-05-2003 06:23 AM by control two co…
Is there any PCI 6533 driver source code or register level inforamtion available?	4	Unidec	0	‎10-02-2002 10:32 AM by Christian_L
Can I use 3 ports simultaneously?	1	VIA Technology	0	‎07-24-2002 11:07 AM by Filipe A.
Accessing counter value on STARTTRIG/ACQ line for Dio-6533	1	jdendil	0	‎07-18-2002 09:33 AM by Filipe A.
How to increase speed port reading	2	Ptruong	0	‎07-17-2002 09:42 PM by Unidec
Printing in realtime	1	bobhusar	0	‎07-17-2002 03:21 PM by DanielMcchane
Cannot get high transfer rates with PCI-6534	4	Darren Draper	0	‎07-17-2002 08:09 AM by Darren Draper
buffered triggered digital output with NI 6533 PCI-DIO-32HS	1	Nandhini Swami…	0	‎07-15-2002 01:35 PM by Filipe A.

Subject	Kudos
Re: Error 50405 using DAQ USB 6008 and LabVIEW 8.6.1	1
Re: Simultaneous Digital Input and Output from NI 9403	1
Re: Can't read digital channels as physical on USB 6008	1
Re: Error -201314	1
Re : open collector Incremental encoder	1

User	Kudos Count
apok	3
AnalogKid2Digi…	2
PattyD	1
Buechsenschuetz	1
CristinaFC	1

User	Tag Count
macaba	142
ajog	24
David S.	17
Keong Kam	16
Russellg	16



My Profile \| Privacy \| Legal \| Contact NI © 2011 National Instruments Corporation. All rights reserved. \| E-Mail this Page