04-30-2013 04:30 AM
Hi,
Im using cdaq 9188 controller and 7 different io modules like.
1: NI 9426
2: N I9477
3: NI 9205
4: NI 9264
5: NI 9485
6: NI 9211
7: NI 9222
When i run for Digital output using daqmx create channel.vi , and write digital channel i set TRUE as auto start task.
here i am getting error as:
Error code = -225202
Error description = Internal softwware occurred in MIO software. Please contact national Instruments support.
What could be the reason, please suggest me:
04-30-2013 06:11 AM
please do reply.. i guess this is most active board
04-30-2013 10:14 AM
http://digital.ni.com/public.nsf/allkb/1B7C591595D03F82862574120068AB55
This link might be helpful. It is infact the only link I can find regarding the error you mentioned.
06-10-2014 10:43 PM
Hi,
I also faced the same error. same cdaq model.
tried both in your link but no luck.
06-10-2014 10:56 PM
Hi Balaji,
How do you rectify the problem?
can you share?
thank you
09-25-2014 12:54 PM
Check the firmware version of your 9188. Mine was shipped with 1.1.0f0; upgrading to 1.5.1f0 fixed my MIO software error.
New firmware here: http://www.ni.com/download/ni-cdaq-9188-firmware-1.5.1/4302/en/
09-25-2014 07:46 PM
Hi Matt,
Yes yes..it works perfectly after i update the firmware..
thank you Matt.