Digital Input using NI 6110

[VEEDAY]

I have NI PCI-6110 DAQ and I have input TTL signal of 15 MHz. I was thinking to acquire this signal using DIGITAL INPUT. Is there a way? If yes, can you please illustrate with an example? Your help is highly appreciated. 

Raj

[Dennis_Knutson]

As you can see by looking at the specs, the digital I/O is software timed only so of course you cannot use them. Why don't you want to use the counter on the board? Do you want to do more than measure the frequency? If so, you will need a board with hardware timed digital inputs.

[VEEDAY]

Thanks Denis. I will have a look at it on Monday. I have a device that sweeps in frequency (14-18 MHz) and was thinking to know exact instance of the change using the DIO or lets say counter. If it can work I can use this DAQ otherwise, can you suggest some good DAQs?

Thanks again

Raj