DigiMetrix

cancel
Showing results for 
Search instead for 
Did you mean: 

How can I monitor the current position & status of Denso using Labview

Solved!
Go to solution

I know there are functions like "current position" and "get robot status", but how can I see the real-time position & status, while robot is moving. 

I mean, not the status at one point, but the entire time.  

Thanks! 

 

by S 

0 Kudos
Message 1 of 5
(10,216 Views)

Hi,

 

in order to read continuously robot position and status when the arm is moving, you could use a motion command with NEXT option as following:

 

move_next

this VI will be executed immediately without waiting the motion complete. Then after it you could place a while loop with reading of position and status until motion complete.

This way is not properly a real-time position and status reading but is the simplest way to get these info during motion.

 

Concerning real-time motion, ImagingLab is working on a new feature available from DENSO.

 

Hope this helps.

 

Regards,

 

Simone 

0 Kudos
Message 2 of 5
(10,213 Views)
Do I use a while loop to include everything, (i.e from denso open all the way to denso close) ? And place the function which reading position before the loop?   Thanks!  
0 Kudos
Message 3 of 5
(10,209 Views)
Solution
Accepted by ZSH2010

Like this:

 

example_code 

0 Kudos
Message 4 of 5
(10,206 Views)
Thank you! you are a genius!  
0 Kudos
Message 5 of 5
(10,203 Views)