|
|||||||||||||
When you have made a measurement with GPS positions included in your data, it should be possible to report or view a measured parameter on these GPS positions. It should be possible to give different colours to the parameter values. E.g. I have made some vibration measurements on a tram with GPS positions. When it is possible to give low vibrations levels a green colour and high levels a red colour you can easy spot bad sections of track. It is combining two functios DIAdem already has: GPS maps and 3D characteristic diagram.
Hey PatricZi -
This idea has already been suggested here:
I really like your picture, though - it displays the idea very clearly. I am going to close this idea as duplicate - will you add your picture and kudos do the exisiting post so that we can keep track of your preference for this feature?
Derrick Snyder
Product Manager
NI DIAdem
You must be a registered user to add a comment here. If you've already registered, please log in. If you haven't registered yet, please register and log in.
Post New Idea to submit a product idea. Be sure to submit a separate post for each idea. Note: the DIAdem Idea Exchange is not the appropriate forum to submit technical support questions.The DIAdem R&D team is committed to reviewing every idea submitted via the DIAdem Idea Exchange. However, we cannot guarantee the implementation of any DIAdem Idea Exchange submission until further documented.
My Profile | Privacy |
Legal |
Contact NI
© 2011 National Instruments Corporation. All rights reserved. | E-Mail this Page
|
||

E-Mail this Page